UP whole arch
Specifications
Technical information
A table top with a whole arch is typically selected in workplaces where the need for table top space is minimal. The whole arch gives your table a soft expression. Cube Design’s whole arch table top is always made with a beveled edge. The beveled edges can be painted in clear lacquer or one of Cube Design’s many Cube Color colors. This applies to all materials except veneer.
The total depth of the table top is 900 mm and the arch has a depth of 150 mm at the center of the table top. Cube Design’s table top with a whole arch is available in five standard lengths: 1200 mm, 1400 mm, 1600 mm, 1800 mm and 2000 mm.
The UP frame is available in white, alu or black powder-coated steel.
Choose between two different control panels: standard or a control panel with memory, which can be programmed to three fixed heights.
UP desktops in general:
- Rectangular (50×80 mm) columns placed in the middle of the feet (L700mm)
- Table tops with radius 20 on corners
- Height adjustment of 62-127 cm
- The frames lift approx. 60 kg pr. column
- Anti-collision
- Soft start / stop
- Low noise motor
- Rail-free construction
- 0.1W in standby
- CE marked and EN 527-1_2 certified
- Flexible and easy to assemble
- 5 years warranty on all UP sit-stand desks.
Guide to reset UP: Keep pressing the “down” button for 5 seconds, te display shows RST. Release the button, and press the “down” button again to reset.