UP stomach and meeting arch
Specifications
Technical information
In Cube Design’s office we uses table top with both stomach and meeting arch. The curved shapes make the table very elegant. The meeting arch also allows you to get your screens a little further away.
Tables with meeting arches are especially good for short, informal customer meetings or if you need chairs on the opposite side of where you are sitting.
The stomach and meeting arch table top is available in two total depths: depth 900 mm, where the arch depth are 120 mm and the ends are 800 mm or depth 1100 mm, where the arch depth are 150 mm and the ends are 950 mm.
Table tops with stomach and meeting arch are available in five standard lengths: 1200 mm, 1400 mm, 1600 mm, 1800 mm and 2000 mm.
The UP frame is available in white, alu or black powder-coated steel.
Choose between two different control panels: standard or a control panel with memory, which can be programmed to three fixed heights.
UP desktops in general:
- Rectangular (50×80 mm) columns placed in the middle of the feet (L700mm)
- Table tops with radius 20 on corners
- Height adjustment of 62-127 cm
- The frames lift approx. 60 kg pr. column
- Anti-collision
- Soft start / stop
- Low noise motor
- Rail-free construction
- 0.1W in standby
- CE marked and EN 527-1_2 certified
- Flexible and easy to assemble
- 5 years warranty on all UP sit-stand desks.
Guide to reset UP: Keep pressing the “down” button for 5 seconds, te display shows RST. Release the button, and press the “down” button again to reset.